很多客戶和朋友在購買鋁卷時，出于各種原因。因此，沒有進行適當的保存或處理，導致鋁卷腐蝕、氧化。因此，今天鋁卷生產廠家就為大家講解一下防止鋁卷氧化腐蝕的六種措施，希望能在大家能在產品防護等方面有所幫助。
Many customers and friends buy aluminum coils for various reasons. Therefore, the aluminum coil was corroded and oxidized due to improper storage or treatment. Therefore, today's aluminum coil manufacturer will explain six measures to prevent aluminum coil from oxidation and corrosion, hoping to help you in product protection.
1.鋁卷到達后，建議考慮溫差、空氣等原因，以便做出加工決定。例如，在兩地溫差較大的情況下，建議在到貨后三天內打開包裝。這樣可以避免鋁卷表面因日夜或空氣而引起的腐蝕。
1. After the aluminum coil arrives, it is recommended to consider the temperature difference, air and other reasons to make processing decisions. For example, in case of large temperature difference between the two places, it is recommended to open the package within three days after arrival. This can avoid corrosion of aluminum coil surface caused by day and night or air.
2.一般情況下，在貨物到達并開箱后。對鋁卷的加工環境進行管理，我們建議在幾個環境中進行儲存加工時，空氣越正常，正常通風，儲存環境越好。切記避免在潮濕等地方存放。
2. Generally, after the goods arrive and unpack. To manage the processing environment of aluminum coils, we suggest that the more normal and ventilated the air is, the better the storage environment is. Remember to avoid storage in damp places.
3.鋁卷在倉庫處理后，建議我們繼續使用密封包裝存放。因為擔心某些地方的溫差和室內外環境等各種不可抗拒的因素。或者建議密封包裝，有條件的可以考慮在適當的數量的干燥劑。
3. After the aluminum coil is processed in the warehouse, it is recommended that we continue to use sealed packaging for storage. Because we are worried about various irresistible factors such as temperature difference in some places and indoor and outdoor environment. Or it is recommended to seal the package, and if possible, consider the appropriate amount of desiccant.

4.對于一些出口單位使用的木質包裝或木質包裝，我們鋁卷廠家建議木制品的空氣環境一定要從源頭通風。同時，在選擇木材時開始控制水分，水分、干燥等因素要考慮。
4. For the wooden packaging or wooden packaging used by some export units, our aluminum coil manufacturer suggests that the air environment of wood products must be ventilated from the source. At the same time, when selecting wood, start to control moisture, moisture, drying and other factors should be considered.
5.在使用鋁卷產品時，注意使用光線，避免鋁卷表面變形、變質等因素。使用后，建議是按原保修單辦理。如果因為周圍條件或其他因素的情況，建議是通風放置。
5. When using aluminum coil products, pay attention to the use of light to avoid the surface deformation, deterioration and other factors of aluminum coil. After use, it is recommended that the original warranty be followed. If it is due to the surrounding conditions or other factors, it is recommended to place it in a ventilated way.
6.其次，一些簡單的鋁卷儲存例行問題，一定要放置在車間內可以關閉，在儲存的時候要避免車間滲水，雨水滲漏等。其次，在北方地區，還應考慮不要被雨水侵蝕造成鋁卷腐蝕。
6. Secondly, some simple aluminum coil storage routine problems must be placed in the workshop and can be closed. During storage, workshop water seepage and rainwater leakage should be avoided. Secondly, in the northern region, it should also be considered not to be corroded by rain.
鋁卷產品防氧化腐蝕做出的六種防護措施就是以上所講解內容了，您對此有什么問題可以隨時來我們網站http://m.ahxsxljk.com做下咨詢！
The six protective measures against oxidation and corrosion of aluminum coil products are explained above. If you have any questions, please come to our website at any time http://m.ahxsxljk.com Do some consulting!